English
Español
Português
Pусский
2024
How to Choose a Pneumatic Positioner?
In this article, we'll guide you through key considerations when choosing a pneumatic positioner, including installation options, size compatibility, and features like communication protocols.
2024
In this article, we'll guide you through key considerations when choosing a pneumatic positioner, including installation options, size compatibility, and features like communication protocols.
2024
In this article we break down how the two actuator types work, the main differences, advantages and disadvantages to help you choose the right actuator type.
2024
Electric-pneumatic valve locator is a device that receives DCcurrent signal 4-20mA from the controller or the control system,and theprecisely controls valve opening through pneumatic actuator.
2024
Pneumatic actuators are driven by compressed gas sourced externally, most frequently dry clean air. Commonly, a single air compressor can simultaneously power several pneumatic actuators, endowing the
2024
In an era where automation and efficiency are paramount, pneumatic actuators have emerged as vital components in numerous industrial applications. Harnessing the power of compressed air, these devices
2024
During the use of pneumatic valves, some auxiliary parts are usually required to improve the performance of pneumatic valves or improve the efficiency of pneumatic valves. Common accessories for pneum
2024
The gate valve is a gate that opens and closes. The movement direction of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully opened or fully closed, and cannot b
2024
Pneumatic valves are one of the most widely used equipment in various industries in recent years. They are driven by compressed air to open and close the valves. Pneumatic actuators can easily achieve
2024
1. principle Y-type filter is an indispensable filtering device in the pipeline system for conveying fluid media.Y-type filters are usually installed at the inlet end of pressure reducing valves, pres
2024
(1) The regulating valve does not operate Reasons: There is no signal pressure or the diaphragm is cracked, the diaphragm is leaking, the diaphragm thrust is reduced; the valve core and the valve s
2024
1. Indicator light failure1.Fault phenomenon:After powering on the electric actuator, I found that the power indicator light did not light up, the servo amplifier board had no feedback, and the signal
2024
Hearken Flow ITS position monitoring switch is used for the valve and actuators which rotates 90degree quarter turn. The first function of ITS is to provide visual indication of current position of va
GET A QUOTE