How Does Electro-Pneumatic Positioner Work?
Electric-pneumatic valve locator is a device that receives DCcurrent signal...
4M series NAMUR solenoid valve, port size ranges from 1/8” to 1/2". Among which 4M310 -08 are international standard and 4M310-08G series are 5/2 way to 3/2 way inter-changable. The spool of 4M series Namur valve, is cutted and one-timemachined from superior aluminum alloy rod , by high precision CNC machine; Valve body use strong aluminum alloy ,ensuring clean and rigid thread. Dynamic and static armature made by Japan-imported hybrid machining center at one time with Germanyimported stainless steel material, ensuring high accuracy and rapid magnetizing and . demagnetizing; Integral coating of coil by thermosetting BMC ,ensuring IP65 protection, low temperature rise, longer service life. Specialized Machining + Assembly + Testing automation production streamlines, ensuring high quality stability and consistency of 4M series NAMUR solenoid valve,supported by special low power technology, low power, low temperature rise, PLC directly connection, long life!
●Dynamic/static armature made of Germany stainless steel material, fast response
●Mould of pilot seat is made by top-level supplier, high precision for plastic parts.
●Spool one- time-machined from superior aluminum alloy rod , by high precision Japan CNC
●Valve body use 6061-T6 aluminum alloy ,ensuring clean and rigid thread.
●Special mini filter is designed on pilot exhaust port, cleaner inner air
●Integral coated coil by thermosetting BMC, IP65 protection, low temperature rise, longer life
●Machining + Assembly + Testing automation production streamlines, high stability and consistency
●Function various 5/2,3/2,5/3, solenoid control,air control,size ranges 1/8"-1/2"
●Imported seal
●Imported grease
●Germany stainless steel
●High precision mould
●Strength aluminium
NO. |
Part name |
Material |
NO. |
Part name |
Material |
|
1 |
Connector |
Engineering plastic |
10 |
O-ring |
HNBR |
|
2 |
Nut |
POM+Carbon steel |
11 |
Rear cover |
Engineering plastic |
|
3 |
Coil |
Cu |
12 |
Filter |
Synthetic material |
|
4 |
Pilot units |
13 |
Piston |
POM |
||
5 |
Plate |
Carbon steel |
14 |
Spring |
Stainless steel |
|
6 |
Piston |
POM |
15 |
Manual override |
Engineering plastic |
|
7 |
Pilot seat |
Engineering plastic |
16 |
Back seat |
Aluminum alloy |
|
8 |
Valve body |
Aluminum alloy |
17 |
Spring seat |
Aluminum alloy |
|
9 |
Spool |
Aluminum alloy |
18 |
C-type buckle |
65Mn |
Model | 4M110-M5 | 4M110-06 | 4M210-06 | 4M210-08 | 4M310-08 | 4M310-10 | 4M410-15 |
4M120-M5 | 4M120-06 | 4M220-06 | 4M220-08 | 4M320-08 | 4M320-10 | 4M420-16 | |
Working Media | Air | ||||||
Action Mode | Intemal Pilot Type | ||||||
Position | 5/2 Port | ||||||
Effective Sectional Area | 5.5MM²(Cv=0.31) | 12.0mm²(Cv=0.67) | 14.0mm²(Cv=0.78) | 16.0mm²(Cv=0.89) | 25.0mm²(Cv=1.40) | 30.0mm²(Cv=1.68) | 50.0mm²(Cv=2.79) |
Port Size | Input=Output=M5×0.8 | Input=Output=G1/8 | Input=G1/4, Exhaust port=G1/8 |
Input=Output=G1/4 | Input=G3/8, Exhaust port=G1/4 |
Input=Output=G1/2 | |
Lubrication | No Need | ||||||
Working Pressure | 0.15-0.8Mpa | ||||||
Proof Pressure | 1.0Mpa | ||||||
Working Temperature | 0~60℃ | ||||||
Voltage Range | |||||||
Power Consumption | AC:2.8VA DC:2.8W | AC:5.5VA DC:4.8W | |||||
Insulation Grade | F Level | ||||||
Protection Class | IP65(DIN40050) | ||||||
Connecting Type | Plug Type | ||||||
Max. Operating Frequency | 5 Cycle/Sec | ||||||
Min.Excitation Time | Aluminum Alloy | ||||||
Material | NBR |
2024
/
Electric-pneumatic valve locator is a device that receives DCcurrent signal...
2024
/
Pneumatic actuators are driven by compressed gas sourced externally, most f...
2024
/
In an era where automation and efficiency are paramount, pneumatic actuator...
2024
/
During the use of pneumatic valves, some auxiliary parts are usually requir...
GET A QUOTE